
Acer Remote Management Card (ARMC) User’s Guide
114
RMConfigApp, Continued
Firmware Flash Tab
The Firmware Flash tab allows you to flash the ARMC cards firmware.
Note: The firmware upgrade process is a crucial operation. Make sure that the chances of a
power or connectivity loss are minimal when performing this operation.
The Firmware Flash fields are explained in the table below:
Field/ Button Description
Image File The Image File field allows you to specify file name to be flashed. Left click the Browse
button to locate the firmware (*.IMA) update file.
Module Number The Module Number field displays the module type.
Card Version The Card Version field displays the current module version loaded on the ARMC card.
File Version The File Version field displays the new module version of the firmware update file.
Allocation Check The Allocation Check field displays if there is enough space for the updated module on the
ARMC card. If there is not enough space, then you must do a Complete Flash.
Browse Button The Browse button allows you to locate the firmware (*.IMA) update file from the hard
disk drive, the floppy disk drive, or any other storage location.
Flash Button The Flash button allows you to begin flashing the new firmware image to the ARMC card.
Note: The firmware upgrade process is a crucial operation. Make sure that the chances
of a power or connectivity loss are minimal when performing this operation.
Exit Button The Exit button allows you to log off the ARMC Card Configuration.
Complete Flash
Mode
You can place a check in the box next to Complete Flash Mode to write the updated flash
image to the ARMC’s firmware hub. By default, both options under it are enabled.
Include Boot Block This option allows you write to the boot block section of the ARMC’s firmware hub.
Try to Retain
Configuration
This option will attempt to save all of your ARMC’s administrator settings.
Cont’d
Komentarze do niniejszej Instrukcji