Acer EL1800 Informacje Techniczne Pobierz pdf (Strona 30)

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.

CMOS Setup Utility-Copyright( C ) 1985-2008, American Megatrends, Inc.

Integrated Peripherals

Onboard SATA Controller Enabled

Onboard SATA Mode AHCI

Item Help

Legacy USB Support Enabled Options

Onboard Graphics Controller Enabled Enabled

Onboard Audio Controller Enabled Disabled

Onboard LAN Controller Enabled

OnBoard LAN Boot ROM Disabled

Serial Port1 Address 3F8/IRQ4

↑↓→←：Move Enter：Select +/-：Value F10：Save ESC：Exit

F1：General Help F9：Optimized Defaults

Onboard SATA Controller (Enabled)

Use this item to enable or disable the onboard SATA controller.

Onboard SATA Mode (AHCI)

Use this item to select the mode of the Serial ATA.

Legacy USB Support (Enabled)

Use this item to enable or disable support for legacy USB devices. Setting to Auto allows the system to detect

the presence of USB device at startup. If detected, the USB controller legacy mode is enabled. If no USB

device is detected, the legacy USB support is disabled.

Onboard Graphics Controller (Enabled)

Use this item to enable or disable the onboard graphics controller.

Onboard Audio Controller (Enabled)

Use this item to enable or disable the onboard audio device.

Onboard LAN Controller (Enabled)

Use this item to enable or disable the onboard LAN device.

Onboard LAN Boot ROM (Disabled)

Use this item to enable or disable the booting from the onboard LAN or a network addincard with a remote

boot ROM installed.

Serial Port1 Address (3F8/IRQ4)

Use this item to enable or disable the onboard COM1/2 serial port, and to assign a port address.

Press <ESC> to return to the main menu setting page

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 83 84

Brak uwag

Acer EL1800 Informacje Techniczne Strona 30