Acer VZ.J9000.001 Arkusz Danych Pobierz pdf (Strona 38)

Module Assembly Key Point - Optical Engine

1. Light Pipe Module assembly and overfill alignment

1.1 Assembly LP Module to HSG DMD

(3) Assembly two Overfill adjustment screws to HSG DMD (Fig. 1-1).

** Adjustment criteria refer to below item

(4) Assembly “Clip LP” and lock with screw well (Fig. 1-2).

(5) Press CLIP of RE_BKT_LP first, and then push it into the hole (Fig. 1-3).

(6) Placed LP Module on LP datum of “DMD HSG” and adjustment screw well (Fig.1-4).

(7) Assembly “Baffle LP” first (Fig. 1-5-1) & push “Baffle LP” to hook DMD HSG, and then

lock with screw well (Fig. 1-5-2).

1.2 Overfill Adjustment @ LP Module

Overfill Adjustment Criteria:

(1) Pre-assembly 2 adjusting screws. Criteria shown as Fig.1-6.

(2) Alignment Sequence:

a. To adjust “Horizontal Adjustment Screw” firstly, and then “Vertical Adjustment

Screw”.

b. Refer to Fig. 1-6.

(3) For Overfill Re-adjustment:

a. Those 2 Adjustment Screws must be released closely to the “Pre-assembly”

positions first.

b. Follow adjustment steps shown in Item 4.6-ii.

Fig. 1-1

Fig. 1-2

Overfill Vertical

Adjustment Screw

Overfill Horizontal

Adjustment Screw

Clip LP

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 95 96

Brak uwag

Acer VZ.J9000.001 Arkusz Danych Strona 38